Featured post

Types of mechanical forces

-
A force exerted on a body can cause a change in either the shape or the motion of the body.The unit of force in SI system is the Newton(N) and CGS system is dyne.No solid body is perfectly rigid and when force are applied to it,changes in dimension occur.such changes are not always perceptible to the human eye since they are negligible. For the example,The span of a bridge will sag under the weight of a vehicle and a spanner will bend slightly when tightening a nut. It is also important for civil engineers and designers to appreciate the effects of forces on materials.Together with their mechanical properties of the materials. There three main types of mechanical forces that can act on a body.They are 1)Tensile force 2) compressive force and 3) shear force
2 comments

Lathe accessories and Attachments

-


Lathe Accessories and Attachments Points : Enlist Lathe Accessories and Attachments, Lathe Accessories Several lathe accessories and attachments are accessible to amplify the adaptability of the lathe and the range of work, which can be machined. Major accessories of Lathe machine are as below:
  1. Lathe centers (dead center-live center-revolving center)
  2. Lathe drill holders (sleeves)
  3. Lathe tool holders
  4. Lathe mandrels
  5. Carriage stops
  6. Follower rest
  7. Lathe collets
  8. Drive plate
  9. Steady rest
  10. Face plate
  11. Lathe dogs
  12. Tool post
  13. Chucks
Lathe Attachments Attachment is a mechanism use in link by a machine in classifies to give a order range or improved excellence of work.Major attachments of Lathe machine are as under:
  1. Relieving attachment
  2. Grinding attachment
  3. Milling attachment
  4. Collect attachment
  5. Boring attachment
  6. Taper attachment


Comments

  1. Unknown15 October 2019 at 20:48

    Use full

    ReplyDelete
  2. Oleg1 May 2020 at 07:38

    I want to share a testimony on how Le_Meridian funding service helped me with loan of 2,000,000.00 USD to finance my marijuana farm project , I'm very grateful and i promised to share this legit funding company to anyone looking for way to expand his or her business project.the company is funding company. Anyone seeking for finance support should contact them on lfdsloans@outlook.com Or lfdsloans@lemeridianfds.com Mr Benjamin is also on whatsapp 1-989-394-3740 to make things easy for any applicant. 

    ReplyDelete
  3. Unknown21 June 2020 at 05:23

    Amazing knowledge and I like to share this kind of information with my friends and hope they like it they why I do vapor chamber

    ReplyDelete
  4. Seo Expert10 August 2020 at 01:30

    We provide first-class quality Lathe Machines in Pakistan. Automobiles Machinery, tools and their services included. Get instant price quote from Noor MC. Lathe Machines in Pakistan

    ReplyDelete
  5. tike mik20 February 2021 at 00:29

    Firstly, a product can have a shelf life, wait a product always has a shelf life. The shelf life can be said to be the period that a product is deemed to be usable in a particular state and storage condition. Accountants Doncaster

    ReplyDelete
  6. Jamesy8 July 2021 at 00:43

    It proved to be Very helpful to me and I am sure to all the commentators here! 加熱菸

    ReplyDelete

Post a Comment

Popular posts from this blog

Tailstock

-
Image
The tailstock is located on right side of the bed i.e.right hand side of the operator. The main purpose of a tailstock on an engine lathe is to support free end of a work during operation.it is also used to hold tools for making holes (twist drills,reamers) adjusted along the bed of the lathe accommodate different lengths of stock.it is provided with set over screw at its base for taper turning alignment.it has cast iron body with bore to accommodate tailstock spindle,and the top portion contains the spindle,tailstock hand wheel, and a spindle clamp for locking the spindle in position. The end of the spindle has a taper bore for holding dead centre,taper shank drills and other tools.the spindle can centre,taper shank drills and other tools.The spindle can be moved in and out of the tailstock by the rotation of hand wheel in anticlockwise and clock wise direction respectively.A tailstock is shown in fig.
Read more

ADVANTAGES AND LIMITATIONS OF BROACHING:

-
Broaching is an interesting machining process which is used in mass production. It has certain advantages and limitations as compared to the other machining processes.these are given below. ADVANTAGES : 1) Fast and simple process. 2)High degree of accuracy and finish is possible. 3)Any shape of profile can be easily machined. 4) Machining process is completed with one stroke of broach. 5) Life of broach tool is high. 6)Cutting temperature and tool wear is low. 7) Doesn't require a highly skilled operator. 8)Cutting force acts in the clamping direction I.e.,it doesn't tends to lift the workpiece from fixture. 9)cutting fluids can be applied more easily and effectively. 10)Most economical for mass production of components. LIMITATIONS: 1) Not economical for small quantity productions. 2)Cost of broach is high. 3) Tool grinding (broach sharpening) is difficult and expensive. 4) Not suitable to machine a surface having obstruction. 5) The work m...
Read more

METHODS OF APPLICATIONS OF CUTTING FLUIDS :

-
Image
The method of application of a cutting fluid is very important and depends on the particular operation. These methods vary from hand applications such as use of brush or oil-can to high pressure applications.For high production. The following methods are used.    1)Flood method,    2) Jet method,and    3) Mist method. 1) Flood method : In this method,a reciprocating pump is used to force the coolant over the work and tool.The outlet of the pump is connected to a nozzle through flexible pipe.The nozzle can be adjusted to direct the stream of the fluid at the cutting zone.This is the most common method of application of cutting fluid. 2) jet method : In jet method,a small jet of fluid at high speed is directed at the point of metal separation from the underneath the tool.In high-speed jet system gear or vane type pump is used to maintain high pressure. 3) Mist method : In mist method,the fluid is passed through a specially designed ...
Read more