Featured post

Types of mechanical forces

-
A force exerted on a body can cause a change in either the shape or the motion of the body.The unit of force in SI system is the Newton(N) and CGS system is dyne.No solid body is perfectly rigid and when force are applied to it,changes in dimension occur.such changes are not always perceptible to the human eye since they are negligible. For the example,The span of a bridge will sag under the weight of a vehicle and a spanner will bend slightly when tightening a nut. It is also important for civil engineers and designers to appreciate the effects of forces on materials.Together with their mechanical properties of the materials. There three main types of mechanical forces that can act on a body.They are 1)Tensile force 2) compressive force and 3) shear force
2 comments

Types of Lathe operations and types of lathe machines

-

Lathe Machine

  1. Lathe Machine
  2. Working Principle of Lathe Machine
  3. Main Operative Parts of Lathe Machine
  4. Classification of Lathes Machine
  5. Specifications of a Lathe Machine
  6. Construction of Lathe Machine
  7. Function of Lathe Machine
  8. Lathe Machine Cutting Oils
  9. Care and Maintenance of Lathe Machine
  10. Difference between Capstan Lathe and Turret Lathe
  11. Lathe Accessories and Attachments
  12. Lathe Machine Accessories
  13. Work Holding and Supporting Devices in Lathe Machine
  14. Lathe Machine Tool Post and it Types
  15. Lathe Dogs
  16. Advantages and Disadvantages of Lathe Mandrels
  17. Lathe Mandrels and it Types
  18. Lathe Revolving Center
  19. Lathe Dead Center
  20. Lathe Centers
  21. Drill Holding Devices
  22. Lathe Tool Holders
  23. Lathe Chucks and it Types
  24. Lathe Collets
  25. Lathe Machine Face Plate
  26. Lathe Drive Plate
  27. Lathe Carriage Stops
  28. Advantages and Disadvantages of Lathe Work Holding between Centers
  29. Advantages of Using a Lathe Taper Turning Attachment
  30. Lathe Taper Turning Attachment
  31. Lathe Relieving Attachment
  32. Lathe Milling Attachment
  33. Lathe Boring Attachment
  34. Lathe Grinding Attachment
  35. Advantages and Disadvantages of Split Collet Chuck
  36. Advantages and Disadvantages of Self-Centering Chuck
  37. Advantages and Disadvantages of Face Plate
  38. Advantages and Disadvantages of Four Jaws Chuck
  39. Advantages and Disadvantages of Multi-Jaw Collet Chuck
  40. Size of a Lathe Machine
  41. Lathe Machine Safety Precaution
  42. Types of Lathe Machine
  43. Parts of Lathe Cutting Tool
  44. Types of Lathe Tool Bits
  45. Lathe Machine Cutting Tool Life
  46. Lathe Machine Grinding of Cutting Tools
  47. Lathe Machine Cutting Tool Angles
  48. Mounting Work in a Three-Jaw Chuck
  49. Mounting Work in Four-Jaws Chuck
  50. Difference between Three Jaws and Four Jaws Chuck
  51. Lathe Chalk Method
  52. Using a Dial Indicator
  53. Using Surface Gauge
  54. Centering Operation Lathe
  55. Facing Operation Lathe
  56. Compound Slide Set over Method
  57. Forming Tool Method
  58. Methods of Taper Turning
  59. Tailstock Off-Set Method
  60. Drilling Operation Lathe
  61. Boring Operation Lathe
  62. Reaming Operation Lathe
  63. Knurling Operation Lathe
  64. Multi-Start Threads
  65. Thread and Thread Cutting
  66. Lathe Thread Chasing Dial
  67. Micrometer Carriage Stop of Lathe Machine
  68. Methods of Locating Centres Lathe Machine
  69. Operations Performed by a Lathe Machine

    70. Objective

  70. Lathe Machine - Fill in the Blanks
  71. Lathe Machine - Multiple Choice Questions (Mcqs)
  72. Lathe Machine - True and False
  73. Lathe Machine Cutting Tools - Fill in the Blanks
  74. Lathe Cutting Tools - Multiple Choice Questions
  75. Lathe Cutting Tools - True and False
  76. Lathe Machine Operation - Multiple Choice Questions
  77. Lathe Machine Operation - Fill In the Blanks
  78. Lathe Machine Operation - True and False

    79. Capstan and Turret Lathe

  79. Capstan and Turret Lathes
  80. Types of Turret Lathe
  81. Tooling Principle Capstan and Turret Lathe
  82. Capstan and Turret Lathe Operations
  83. Indexing Turret Lathe
  84. Tool Layout Capstan and Turret Lathe
  85. Work Holding Attachments Capstan and Turret Lathe
  86. Attachments Used on Capstan and Turret Lathe
  87. Difference between Turret Lathe and Engine Lathe

Comments

Post a Comment

Popular posts from this blog

Tailstock

-
Image
The tailstock is located on right side of the bed i.e.right hand side of the operator. The main purpose of a tailstock on an engine lathe is to support free end of a work during operation.it is also used to hold tools for making holes (twist drills,reamers) adjusted along the bed of the lathe accommodate different lengths of stock.it is provided with set over screw at its base for taper turning alignment.it has cast iron body with bore to accommodate tailstock spindle,and the top portion contains the spindle,tailstock hand wheel, and a spindle clamp for locking the spindle in position. The end of the spindle has a taper bore for holding dead centre,taper shank drills and other tools.the spindle can centre,taper shank drills and other tools.The spindle can be moved in and out of the tailstock by the rotation of hand wheel in anticlockwise and clock wise direction respectively.A tailstock is shown in fig.
Read more

ADVANTAGES AND LIMITATIONS OF BROACHING:

-
Broaching is an interesting machining process which is used in mass production. It has certain advantages and limitations as compared to the other machining processes.these are given below. ADVANTAGES : 1) Fast and simple process. 2)High degree of accuracy and finish is possible. 3)Any shape of profile can be easily machined. 4) Machining process is completed with one stroke of broach. 5) Life of broach tool is high. 6)Cutting temperature and tool wear is low. 7) Doesn't require a highly skilled operator. 8)Cutting force acts in the clamping direction I.e.,it doesn't tends to lift the workpiece from fixture. 9)cutting fluids can be applied more easily and effectively. 10)Most economical for mass production of components. LIMITATIONS: 1) Not economical for small quantity productions. 2)Cost of broach is high. 3) Tool grinding (broach sharpening) is difficult and expensive. 4) Not suitable to machine a surface having obstruction. 5) The work m...
Read more

METHODS OF APPLICATIONS OF CUTTING FLUIDS :

-
Image
The method of application of a cutting fluid is very important and depends on the particular operation. These methods vary from hand applications such as use of brush or oil-can to high pressure applications.For high production. The following methods are used.    1)Flood method,    2) Jet method,and    3) Mist method. 1) Flood method : In this method,a reciprocating pump is used to force the coolant over the work and tool.The outlet of the pump is connected to a nozzle through flexible pipe.The nozzle can be adjusted to direct the stream of the fluid at the cutting zone.This is the most common method of application of cutting fluid. 2) jet method : In jet method,a small jet of fluid at high speed is directed at the point of metal separation from the underneath the tool.In high-speed jet system gear or vane type pump is used to maintain high pressure. 3) Mist method : In mist method,the fluid is passed through a specially designed ...
Read more