Featured post

Types of mechanical forces

A force exerted on a body can cause a change in either the shape or the motion of the body.The unit of force in SI system is the Newton(N) and CGS system is dyne.No solid body is perfectly rigid and when force are applied to it,changes in dimension occur.such changes are not always perceptible to the human eye since they are negligible. For the example,The span of a bridge will sag under the weight of a vehicle and a spanner will bend slightly when tightening a nut. It is also important for civil engineers and designers to appreciate the effects of forces on materials.Together with their mechanical properties of the materials. There three main types of mechanical forces that can act on a body.They are 1)Tensile force 2) compressive force and 3) shear force

What is lathe machine?


Lathe Machine Points : Lathe Machine, Definition Lathe machine is a power driven regular machine tool used to make cylindrical conical and flat surfaces by a sharp edge single point tool which is fed next to a turning work piece together held in the holding devices.Taper turning, straight turning, facing drilling, reaming boring, thread cutting. Forming and knurling are several of the familiar operations perform on a lathe machine.

Comments

  1. I’d like to thank you for writing on lathe machine. The information you provided was very useful. I will visit again in the near future.
    soda lime glass properties

    ReplyDelete
  2. Thanks for helping us understand topic on lathe machine. You have written it in a way that makes it very simple to understand.
    fused silica polishing

    ReplyDelete
  3. The issues you’ve raised in this blog are very real. People usually hesitate to write on such topics but you did wonderful work.

    infrared optical wafers

    ReplyDelete
  4. Thank you so much for the sharing information of lathe machine. All contents were expressed in a clear n simplified manner n it was meaningful too.

    thin fused silica wafers

    ReplyDelete
  5. Hey! Thank you so much for sharing this blog with us. It provides a big collection of useful information.

    edge deburring machine

    ReplyDelete
  6. Many congratulations that you could manage to write on this sensible issue. I am taking the helping tips and hope it will be useful for others too.

    shim spacers

    ReplyDelete
  7. very useful information you have given through this blog regarding education sector.
    black light material

    ReplyDelete
  8. You did not divert from the topic even once which I have not seen in many other writers. Also the subject knowledge is appreciable.

    thin ceramic substrates

    ReplyDelete
  9. I guess your blog has clear the confusion in very simpler way. Thank you on behalf of them.

    optical surface roughness metrology service

    ReplyDelete
  10. I was searching for the matter you shared through blog. It is quite interesting and obviously very informative for me. Thanks you very much!
    quartz substrate

    ReplyDelete

  11. Great information. Thanks for providing us such useful information. Keep up the good work and continue providing us more quality information from time to time.
    aluminum nitride machining

    ReplyDelete

Post a Comment

Popular posts from this blog

METHODS OF APPLICATIONS OF CUTTING FLUIDS :

ADVANTAGES AND LIMITATIONS OF BROACHING:

Tailstock